United Launch Alliance confirmed that its return-to-flight Vulcan launch began failing in the mission's early stages, with telemetry and the mission lost about ten minutes into flight. The company said early indications point to low booster performance just after liftoff, leaving the vehicle too low and slow at stage separation to reach orbit. The cause matters because Vulcan's core stage is powered by two Blue Origin BE-4 engines, and the investigation is still described as early and complicated.
Source: https://arstechnica.com/space/2026/11/sources-vulcan-launch-anomaly-investigation-is-complex/
Feed publication: 2026-11-17 18:00 UTC
Details
ULA said the Centaur V upper stage and solid rocket boosters performed nominally, but it gave no specifics on the low booster performance. Ars reported that two sources describe the investigation as "incredibly complicated" and in its early stages, with preliminary data suggesting the problem originated on the launch vehicle side rather than in the engines. The possible issue may involve systems feeding methane and liquid oxygen to the engines, and engineers are examining whether one BE-4 produced reduced thrust shortly after liftoff. High-zoom tracking video reportedly showed one engine slightly dimmer than the other after booster jettison.
Source: https://arstechnica.com/space/2026/11/sources-vulcan-launch-anomaly-investigation-is-complex/
No separately verified response appears in this limited source bundle; materials outside it were not assessed.
What remains uncertain
The findings rest on preliminary data and unnamed sources in a partial article excerpt; ULA has not specified what caused the low booster performance, and no root cause has been confirmed. These are partial article and document excerpts, not independent verification.
Primary source: https://arstechnica.com/space/2026/11/sources-vulcan-launch-anomaly-investigation-is-complex/
Discussion
If you follow launch failures, what evidence would you want ULA and Blue Origin to release before the next Vulcan flight?
Написать Join — чтобы участвовать в обсуждении.