2-(5-Methoxy-1H-indol-3-yl)-N,N-dimethylethan-amine (5-Meo-DMT freebase).
-
To a clean and dry 5 L reactor was charged 4-methoxyphenylhydrazine hydrochloride (145.0 g; 0.83 mol, 1.0 equiv), followed by water (1.45 L, 10 vol) under a nitrogen atmosphere at 20−25 *C.
-
The contents of the reactor were then stirred at 30−35 *C and a dark red colored suspension was observed.
-
To the suspension, concentrated H2SO4 (47.7 ml, 0.91 mol, 1.1 equiv) was cautiously added dropwise under a nitrogen atmosphere over 10 min while maintaining the temperature below 40 *C (slightly exothermic).
-
The brown/red solution was heated to 35−40 *C (with a target temperature of 37 *C) and stirred for an additional 10 min.
-
A solution of 4,4-diethoxy-N,N-dimethyl-butan-1-amine (165.0 g, 0.87 mol, 1.05 equiv) was prepared in acetonitrile (0.58 L, 4.0 vol), and added dropwise to the reactor under a nitrogen atmosphere over approximately 60 min while maintaining the temperature between 35 and 40 *C.
-
The addition funnel was rinsed with acetonitrile (145 ml, 1.0 vol) and added dropwise to the reactor.
-
The temperature was maintained at 40 *C, and the contents were agitated for an additional 4 h.
-
The mixture was cooled to 20−25 *C and the contents were transferred to a 10 L reactor.
-
The acidic aqueous solution was washed with 2-MeTHF (2x2.03L, 14.0 vol).
-
After each wash, the layers were allowed to settle for 15 min.
-
The lower acidic aqueous layer was collected and the upper 2-MeTHF wash was discarded.
-
The acidic aqueous layer was recharged to the reactor and sodium hydroxide solution (4 M, 0.65 L, 4.5 vol) was added dropwise while maintaining the temperature at 20−25 *C to bring the pH to 11−12 providing a milky suspension.
-
The suspension was extracted with 2-MeTHF (3x1.45 L, 10.0 vol); following each extraction, the layers were allowed to settle for 15 min, the lower alkaline water layer was separated into a drum, and the upper organic layer was collected.
-
The lower aqueous layer was discarded and the combined 2-MeTHF organic layers were transferred to a 20 L-flask.
-
The solution was concentrated in vacuo to an oily amber residue.
-
Residual water was removed azeotropically by redissolving the residue with fresh 2-MeTHF (1.45 L, 10 vol) and repeating the concentration step.
-
This oily residue was dried on the rotatory evaporator under vacuum (10−20 mbar) for 1 h at 40−45 *C to provide 117.68 g (64.9% theoretical yield) of crude 5-MeO-DMT freebase.
Написать Join — чтобы участвовать в обсуждении.