Синтез наркотиков [A]

Mescaline Synthesis With Nitromethane. 1000g Scale.

**Reagents:

m4.jpeg Закрыть Открыть: m4.jpeg

3,4,5-Trimethoxybenzaldehyde (cas 86-81-7) 1000 g;
Acetic acid 5 L;
Nitromethane (cas 75-52-5) 2 L;
Cyclohexylamine (cas 108-91-8) 100 ml;
Distilled water ~17 L;
Isopropyl alcohol (IPA) ~23 L;
Sodium borohydride (NaBH4) 1200 g;
Copper chloride (CuCl2) 72 g;
Sodium hydroxide (NaOH) 25% aq. 8 L;
Magnesium sulfate (MgSO4);
Acetone 2.5 L;
Sulfuric acid (H2SO4 conc.) ~410 mL or hydrochloric acid (HCl conc.) ~150 mL;
Equipment and glassware:

Round bottom flask 20 L;
Batch reactor 50 L equipped with drip funnel, top stirrer, reflux condenser and heating system;
Retort stand and clamp for securing apparatus;
Top stirrer;
Boiling chips;
Reflux condenser;
Glass rod and spatula;
Heating plate;
Laboratory grade thermometer;
Laboratory scale (1-1000 g is suitable);
Measuring cylinders 100 mL and 1 L;
Funnel;
Filter paper;
Rotovap machine;
Vacuum source;
Buchner flask (large) and funnel;
pH Indicator paper;
Beakers 1000 ml x2 and 2000 ml x2;
Several buckets;
Freezer;
Step 1. Beta-nitro-3,4,5-trimethoxystyrene synthesis (cas 6316-70-7) from 3,4,5-trimethoxybenzaldehyde.

XzhxvnMYoK.png Закрыть Открыть: XzhxvnMYoK.png

1. 3,4,5-Trimethoxybenzaldehyde (cas 86-81-7) 1000 g , acetic acid 5 L and nitromethane 2 L are added into a 20 l flask.

2. The reaction mixture is stirred and cyclohexylamine 100 ml is added.

**3. **The mixture is heated to 80 °C and stirred for 3 h.

4. Distilled water 10 L is added dropwise with constant stirring. Yellow crystals are formed.

**5. **Crystals are filtered and washed with distilled water.

6. Then, they are air dried at room temperature.

**7. **Next, crystals are dissolved in boiling hot IPA (as minimum as possible) and put into a freezer for 12 h.

**8. **Crystals are filtered, washed with a small amount of cold IPA and air dried after the solution crystallization procedure 7. Beta-nitro-3,4,5-trimethoxystyrene (cas 6316-70-7) yield is 920 g.

Step 2. Beta-nitro-3,4,5-trimethoxystyrene reduction with NaBH4/CuCl2 to mescaline.

EdS9emk4pb.png Закрыть Открыть: EdS9emk4pb.png

1. Isopropanole-water mixture (IPA/H2O 2:1) 18 L is added to a 50 L batch reactor.

2. Sodium borohydride (NaBH4) 1200 g is added in one portion at a constant stirring.

**3. **Beta-nitro-3,4,5-trimethoxystyrene (cas 6316-70-7) 1000 g is added in small portions so that the mixture temperature is kept below 60 °C.

4. Copper chloride (CuCl2) 72 g in distilled water 200 ml is added dropwise so that the mixture temperature is kept below 80 °C.

5. Thereafter, the reaction mixture is held at 80 °C for 30 min with help of an external heating.

6. Sodium hydroxide 25% water solution (NaOH) 8 L is added to the reaction mixture, mixed well. Obtained layers are separated.

7. The aqueous layer is extracted with IPA 8 L (or DCM, or ether, or benzene). Extracts are combined and dried over magnesium sulphate (MgSO4).

**8. **Solvent is distilled off under reduced pressure to an oil.

**9. **The oil is dissolved in dry acetone 2 L.

**10. **Sulfuric acid (H2SO4 conc.) or hydrochloric acid (HCl conc.) is added dropwise with a constant stirring to reach pH 6.

11. The mixture is put into the freezer for 12 h.

12. The suspension is filtered and washed with a dry cold acetone after crystallization procedure. Mescaline (cas 642-73-9 or cas 832-92-8) yield is 60-70%.

m2.jpeg Закрыть Открыть: m2.jpeg
↑ 2

Обсуждение

Комментарии

0

Комментариев пока нет.

Написать Join — чтобы участвовать в обсуждении.